Hi,
I have a borewell whose water is being directed to sumo and from sump there is a 1 hp motor to carry water to overhead tank.
Now, i need a auto controller for borewell and sump separately or in a single controller. Any suggestions regarding this would be very helpful. Thanks in advance.
Ramki
Auto controller for borewell and sump.
-
ardesarchitects
- Posts: 1077
- Joined: June 20th, 2009, 2:12 pm
Re: Auto controller for borewell and sump.
Hi, Ramki
You need two controllers one for sump to tank and other sump to borewel. You need to note that when a controller is used between sump and borewell motor it cannot check for water in borewel instead it will run the bore motor as and when water level falls down in sump .
There is a slave and master machanism too in auotmatic level controller but that is used for other purpose .
Regards,
Ar.Praveen.N
Ardes Architects and Interior designers
ardesarchitects@gmail.com
www.ardesarchitects.com
https://www.instagram.com/ardesarchitects
You need two controllers one for sump to tank and other sump to borewel. You need to note that when a controller is used between sump and borewell motor it cannot check for water in borewel instead it will run the bore motor as and when water level falls down in sump .
There is a slave and master machanism too in auotmatic level controller but that is used for other purpose .
Regards,
Ar.Praveen.N
Ardes Architects and Interior designers
ardesarchitects@gmail.com
www.ardesarchitects.com
https://www.instagram.com/ardesarchitects