Hi Guys,
Could you please review and confirm if the rates are reasonable for frabrication?
1. Main gate at Rs 336 sqft (normal simple design)
2. Security grill work on compound wall at Rs 160 sqft
Many thanks!
Regards,
MG
Are these reasonable rate for fabrication?
-
milangadakari
- Posts: 109
- Joined: August 22nd, 2012, 11:13 pm
-
ardesarchitects
- Posts: 1076
- Joined: June 20th, 2009, 2:12 pm
Re: Are these reasonable rate for fabrication?
Hi MG,
To comment on pricing of any fabrication work we cannot do it by "simple design". Fabrication cost is measurable based on weight per sft and the design complication.
I suggest you understand the details of the security grill like 10mm/12mm/8mm/6mm circular/square rods @ 4"/6"/8" spacing with supporting 25mm/30mm/45mm L angle / 1"/1.5"/2" box section / C channel .
Regards,
Ar.Praveen.N
Ardes Architects and Interior Designers
http://www.ardesarchitects.com
ardesarchitects@gmail.com
https://www.facebook.com/ardesarchitectsblr
To comment on pricing of any fabrication work we cannot do it by "simple design". Fabrication cost is measurable based on weight per sft and the design complication.
I suggest you understand the details of the security grill like 10mm/12mm/8mm/6mm circular/square rods @ 4"/6"/8" spacing with supporting 25mm/30mm/45mm L angle / 1"/1.5"/2" box section / C channel .
Regards,
Ar.Praveen.N
Ardes Architects and Interior Designers
http://www.ardesarchitects.com
ardesarchitects@gmail.com
https://www.facebook.com/ardesarchitectsblr