Vitrified tiles - Comparison

ganeshncm
Posts: 29
Joined: June 22nd, 2017, 7:28 pm

Vitrified tiles - Comparison

Postby ganeshncm » December 28th, 2017, 11:11 pm

I am looking at comparison of vitrified tiles manufactured by Kajaria vs ones like Orient Bell. The size, thickness, designs looks are pretty similar, but there is a huge price difference. Any drawbacks with Orient bell that you guys see?

biocoorg
Posts: 2
Joined: January 11th, 2018, 8:40 pm

Re: Vitrified tiles - Comparison

Postby biocoorg » January 12th, 2018, 8:22 pm

@ ganeshan......go for simpolo or vita, they are too gud

ardesarchitects
Posts: 875
Joined: June 20th, 2009, 2:12 pm

Re: Vitrified tiles - Comparison

Postby ardesarchitects » January 15th, 2018, 9:41 am

Hi Ganesh,
In vitrified tiles industry, since the digital technology is in to the market most of the brand tiles looks same but don't "feel" same. The price variation is because of vitrified base material. If you observe very keen you can make difference in the print quality .
Factors that impact vitrified tiles price
1. Texture
2. Print quality
3. Top protection coatings (Double charged / diamond coat)
4. Precision of die cut ( every tile in the same size )
Orient as such there are no specific problems but i see the design print depth is less compared to kajaria.
In my personal choice i consider RAK > Kajaria > Nitco > oreint purely based on the design quality .


Regards
Ar.Praveen.N
Ardes Architects and Interior Desingers
ardesarchitects@gmail.com
www.ardesarchitects.com

ganeshncm
Posts: 29
Joined: June 22nd, 2017, 7:28 pm

Re: Vitrified tiles - Comparison

Postby ganeshncm » January 15th, 2018, 10:21 am

Thank you.. very helpful inputs
ardesarchitects wrote:Hi Ganesh,
In vitrified tiles industry, since the digital technology is in to the market most of the brand tiles looks same but don't "feel" same. The price variation is because of vitrified base material. If you observe very keen you can make difference in the print quality .
Factors that impact vitrified tiles price
1. Texture
2. Print quality
3. Top protection coatings (Double charged / diamond coat)
4. Precision of die cut ( every tile in the same size )
Orient as such there are no specific problems but i see the design print depth is less compared to kajaria.
In my personal choice i consider RAK > Kajaria > Nitco > oreint purely based on the design quality .


Regards
Ar.Praveen.N
Ardes Architects and Interior Desingers
ardesarchitects@gmail.com
http://www.ardesarchitects.com


Return to “Interiors”

Who is online

Users browsing this forum: No registered users and 2 guests