myBDAsites.com

Sree, will do in a or two..

Guys because of some delay my order was not ready, but i got a sample piece from GITA timbers, thought it's not making justice. but may clear some doubt on how the wood looks, unfortunately this section doesn't show the finger joints, let me know you are able to access

http://www.flickr.com/photos/66681156@N ... 181539375/

also i was browsing through old insideoutside magzine and came across this company, which makes SOLID WOOD PANEL using same technology, not sure about rates

http://www.indiawoodcompany.com/products.htm
Solid Wood Panel Boards from Indiawood are made by most advanced German technology of finger jointing and edge gluing of colour and grain matched timber scantlings. It is available in natural blonde colour in different thickness of 12mm, 15 mm, 18 mm, 24 mm, 30 mm, 35 mm, and 48 mm and in standard size of 1220 mm x 2440 mm (4' x 8') and special sizes according to individual requirement

Naveen, Any updates / pictures?

Sure Sree, shall try this week, was bit tied up with Flaucet/closets... and planning to visit china for Micro Crystal Tiles...

We ordered 10 doors of engineered acasia from Gita timbers. We received them and have also started polishing them (walnut wood look). We are happy with the product. It gives a very rich and elegant look!!!

how much did it cost u?

If possible can you post pictures? Thanks,

Also, a quick question to all those who have gone with Engineered Acasia - do you know how long this product has been in use and what the long term issues might be such as warping and maintenance? My architect is hesitant to go with this due to issues she has seen with other engineered wood for doors and windows before.

Thanks,

concept is 4-5 year old in Bangalore, pretty old in other parts of world. My architect has this wood for staircase to her office and it's outside. it been exposed to all kinds of natural elements
-rain
-Sun heat
- daily at least 30-40 ppl walking
-been there for 3 years, and no polishing or painting is done

and still it looks fine,

Hi,

We were charged Rs 500/- per sqft for the doors.